Need Help?
+61 8 9328 8986

Princess Sportboat 950mm Long

$399.00
3081/00
In Stock *
In Stock at PerthRC.
+

Princess

These Boats look really nice when built, the woodwork in them is amazing. They look the part sitting on the mantle piece or running in the water. Lots of fun to build and drive!

The Princess is a model of a typical Italian sports boat designed in the middle of the last century, drawn up to a scale of around 1 : 8. Then as now the Princess is built from high-quality mahogany timber.
The kit is of all-wood construction (plywood and mahogany) with a hard chine hull, which is the basic requirement for simple, fast assembly. All the wooden parts are very highly pre-fabricated, laser-cut or die-cut, and can be glued together after just a brief trial-fit and final trim. The hull is built on a die-cut Depron sheet jig which defines the position of the components; the builder can therefore immediately start constructing the boat. The hull is the same design as used for our Queen, which has proved highly successful. The open cockpit area takes the form of a complete, watertight cradle which can be removed to provide generous access to the power system and RC components.

Kit contents:
All wooden parts required to build the boat, fittings and propeller shaft.

\"\"


Specification

Length 950 mm
Width 315 mm
   
RC functions:  
Forward / stop / reverse running  
Left / right  
   
Suitbale power system: for 7 cellsNiMH or 3s Lipo
Motor Race 650 Order No. 7124/18
Controler Multi 25 Order No. 7019/71
3-blade propeller 40mm/M4 Order No. 7166/06
   
Top-drive for 10 cells NiMH or4s Lipo:
Motor actro C5 Order No. 7002/35
Controler actronic 45bec Order No. 7002/51
3-blade propeller 50mm/M4 Order No. 7166/12