Features:
The new designed 2nd version software and hardware have many new features.
Supports all motor types up to 210,000 rpm(2 Poles motors).
Extremely low resistance, factory high quality MosFETs, for high current usage.
Dualsky Governor Mode(DGM) ready.
Adjustable cut-off, either motor stop or reduction in power.
DLBM on/off - Dualsky Linear Brake Mode. Brake strength can be adjusted by transmitter
when switch on.
Full protection features including: Low voltage cut-off, Over heating protection, signal loss
auto cut-off.
Normal and Super-Soft start up modes available, for both fixed wing and helicopter setups.
Smooth and accurate throttle control throughout the range.
Throttle digital signal sampling, compatible with the signal frequency of 14 ms(Normal mode)
and 7 ms high-speed mode (HS Mode).
Throttle range can be re-calibrated, so suitable for all brands of transmitter.
Fully PC programmable when used with Dualsky USB link(#45525).
Compatible with programming card(#45200) for easy re-programming at the field!
Control signal applied OPTO technology, eliminate the interference from high voltage to the
control system.
Specification
Dimensions: 90x 55x 20mm(L x W x D)
Weight: 140g
Number of Cell: NiXX 15-36, 18-43.2V
LiPo 5-12S, 18.5-44.4V
Resistance(Ri)(Ohm): 0.0023
Max Cont. Current & Max Cont.Output: 100A, 3780W
Max Burst Current & Max Burst Output: 120A, 4896W
BEC / Dissipative Power:N/A OPTO
Programmable: Throttle + ProgCARD V2
Input Wires: 150mm, 12AWG, DC3
Output Wires: 90mm, 12AWG, DB4
Signal Wire: 300MM JR
Applications:
2M FAI F3A and 3D
Up to 10kg Large Models